Video Loading

Designed to Endure the Elements
POWERply® Endure® MB Roof System

Setting a new standard for modified bitumen membranes that feature four innovative properties built into each sheet that maximizes your roof's performance and withstands the test of time.

POWERply Endure membranes improve rooftop protection and overall durability, stop the spread of water and enable component tracking. This roofing system is tough, designed to last for decades in any kind of weather.

When combined with our POWERply Endure BIO Adhesive, the result is the best MB system available today.

FREE Evaluation
RBM_image_GranulockAd-1

The Difference is Huge.
Innovation, It’s been our calling card since 1928. 

Tremco strives to continue to raise the standard in the roofing industry. For over 90 years we have been keeping you warm, dry and safe.

We protect your assets, with our patented fiber waterproofing technology and GranuLock™ adhesion, ultimately increasing the lifespan of your asset, your building's roof.

POWERply Endure's system is not just another MB roof but a revolutionary roof that is unmatched from any other Modified Bitumen system in the commercial roofing industry.

See for yourself, watch this commercial to find out how the new POWERply Endure system By Tremco is changing the way Modified Bitumen Roof Systems perform, outlast and redefine the industry. 

The Future of Modified Bitumen Membranes Is Here

RBM_icons_POWERply-Gray-05

GranuLock™

Factory-applied granule surfacing protects the MB system from UV exposure, which is vital to the system’s longevity; just as important, these granules help provide a fire-resistant surface. It’s hard to overstate the importance of granule retention.

RBM_icons_POWERply-Gray-07

Anti-Wicking Fabric

POWERply Endure Membranes incorporate an industry-first anti-wick fabric treatment, which drastically reduces the potential for moisture to wick into and travel up the reinforcing fabric, addressing another industry issue with a solution to help keep your roofs dry. 

RBM_icons_POWERply-Gray-06

Durability

Durability is an MB system’s most important feature, after waterproofing. POWERply Endure membranes are firmer under foot than competitive membranes, resisting traffic damage, marring, and the wear and tear of long term exposure to the elements. Tougher membrane, longer roof life.

RBM_icons_POWERply-Gray-08

RooF-ID™

Tremco Roofing incorporates technology onto the back of every POWERply Endure membranes roll. If information on a roll is needed, a technician walks and scans an area of the roof to Tremco Operations. We cross reference these numbers against our record; if any action is required, we handle it quickly and efficiently.

Tremco Setting New Standard in Roofing Adhesive

POWERply® Endure™ BIO Adhesive
Setting a New Standard in MB Adhesive

Tremco Roofing is setting a new standard for modified bitumen membrane adhesives with POWERply Endure BIO Adhesive. The high performing, fast setting adhesive is designed to work around your schedule and various weather conditions. 

Its ultra low odor is virtually undetectable allowing for hospitals and businesses to stay open, and schools to remain in session. Our certified roof experts are with you every step, and our advances in technology are designed to maximize performance in your roof system. To schedule an appointment with a Tremco Roofing representative today. 

POWERply Endure membranes improve rooftop protection and overall durability, stop the spread of water and enable component tracking. This roofing system is tough, designed to last for decades in any kind of weather.  

 

3 Easy Steps

To Begin Your Building's Roof Assessment

FREE Evaluation

Schedule a FREE Evaluation

Meet Our Certified Roof Expert

 

Plan Your Building's Project

 
  • Literature

    Access everything you need to stay in the know with POWERply. Here you will find Product Data Sheets on all nine systems, Marketing Material for contractors, building owners, and facility managers and Safety Data Sheets for technical reference. 

    Be sure to sign up for our newsletters to stay up to date on POWERply Endure content.

    SUBSCRIBE

    • Product Data Sheets

      Download all Product Data Sheets conveniently in one easy-to-share document right here!

      POWERply Endure MB RollsDownload ALL Product Data Sheets

      Download

       

       

       

       

       

       

       

       

       

       

       

       

      Download Individual Pages:

      POWERply® Endure™ 100 FR:
      A Fire Rated, Granule Surfaced, High Tensile, Fiberglass Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 100 Smooth:
      Smooth Surfaced, High Tensile, Fiberglass Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 200 FR: 
      A Fire Rated, Granule Surfaced, Polyester Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 200 Smooth:
      Smooth Surfaced, High Elongation, Polyester Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 300 FR:
      A Fire Rated, Granule Surfaced, High Tensile, Bilaminate Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 300 Smooth:
      Smooth Surfaced, High Tensile, Bilaminate Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 320 FR:
      A Fire Rated, Granule Surfaced, High Tensile, Bilaminate Reinforced SBS Modified Bitumen Membrane.

      POWERply® Endure™ 320 Smooth:
      Smooth Surfaced, High Tensile Bilaminate, Reinforced SBS Modified Bitumen Membrane.

    • Marketing Material

      Check out the marketing material below available to contractors, facility managers and building owners. Mobile friendly flipbooks are available for reading on any device and you have the option to conveniently download, print and share.

      Picture1-Feb-21-2023-06-35-22-1359-PM

      Contractor Brochure

      Download

       

      Picture2-Feb-21-2023-06-39-29-3433-PM

      Building Owners & Facility Managers Flyer

      Download


       

    • Safety Data Sheets

      Download all Safety Data Sheets conveniently in one easy-to-share document right here!

      RBM_datasheets_POWERplyEndure320SM-v6

      Download ALL Safety Data Sheets

      Download

       

       

       

       

       

       

       

       

       

       

       

       

       

      Download Individual Pages:

      POWERply® Endure™ 100 FR:
      A 126 mil (3.2 mm) granule surfaced,  high tensile nonwicking fiberglass mat & scrim reinforced SBS/RET/TPU modified bitumen membrane with GranuLock surface treatment & RooF-ID chips. 

      POWERply® Endure™ 100 Smooth:
      A 90 mil (2.3 mm) smooth surfaced, high tensile non-wicking fiberglass mat & scrim reinforced SBS/RET/TPU modified bitumen membrane with RooF-ID chips. 

      POWERply® Endure™ 200 FR: 
      A 150 mil (3.8 mm) granule surfaced, high elongation polyester reinforced SBS/RET/TPU modified bitumen membrane with GranuLock surface treatment & RooF-ID chips.

      POWERply® Endure™ 200 Smooth:
      A 94 mil (2.4 mm mm) smooth surfaced, high elongation polyester reinforced SBS/RET/TPU modified bitumen membrane with RooF-ID chips.

      POWERply® Endure™ 300 FR:
      A 146 mil (3.7 mm) granule surfaced, very high tensile nonwicking polyester & fiberglass reinforced SBS/RET/TPU modified bitumen membrane with GranuLock surface treatment & RooF-ID chips.

      POWERply® Endure™ 300 Smooth:
      A 94 mil (2.4 mm mm) smooth surfaced, high tensile non-wicking fiberglass mat & scrim reinforced SBS/RET/TPU modified bitumen membrane with RooF-ID chips. 

      POWERply® Endure™ 320 FR:
      A 146 mil (3.7 mm) granule surfaced, extremely high tensile nonwicking polyester & fiberglass reinforced SBS/RET/TPU modified bitumen membrane with GranuLock surface treatment & RooF-ID chips.

      POWERply® Endure™ 320 Smooth:
      A 87 mil (2.2 mm mm) smooth surfaced, high tensile non-wicking fiberglass mat & scrim reinforced SBS/RET/TPU modified bitumen membrane with RooF-ID chips. 

  • Frequently Asked Questions
    • What is GranuLock?

      GranuLock is a clear factory applied surface treatment for POWERply Endure granule surfaced rolls, which further enhances the granule adhesion.

       
    • Will GranuLock prevent field applied coatings from adhering to the top of the granule surfacing?

      No, GranuLock is compatible with water-based acrylic, urethane, and silicone coatings, adhesives, or sealants and will not adversely affect the adhesion of these materials to the granule surface.

    • Can I get GranuLock in a pail to apply it onto existing granule surfaced MB roofs?

      No, GranuLock is not a field applied coating and can only be applied at Tremco Incorporated plants as it requires customized equipment and is installed during the manufacturing process of the POWERply Endure membrane. 

    • Why is granule retention so important for the longevity of SBS modified bitumen roof membranes?

      The factory applied granule layer shields the SBS rubber modified asphalt from UV exposure.  If the granules are not there, the asphalt/rubber blend is fully exposed to UV and weathering, and the modified bitumen membrane will age at a faster rate.

    • WIll GranuLock become slippery when wet?

      No, the GranuLock surface treatment does not make the roof surface more slippery.  The natural traction effects from the granule surface is not adversely affected. 

    • Why is the POWERply Endure bitumen blend more durable?

      The SBS rubber modifier is enhanced with two additional polymers, a Reactive Elastomeric Terpolymer (RET) and a Thermoplastic Polyurethane (TPU), which blend with the SBS and asphalt compound.  The resulting asphalt/rubber blend has better high temperature resistance of the POWERply Endure membrane, while all other key properties, such as low temperature flexibility, are not adversely affected.  Because of this feature, the POWERply Endure membrane will be “firmer” under foot, resist marring from foot traffic better, hold the granules stronger, all of which result in less wear and tear.  Because of this, POWERply Endure MB’s are better able to resist the effects of long term weathering. 

    • Why is an anti-wicking reinforcing fabric needed for a modified bitumen roof membrane?

      Roofing systems are exposed to weathering 24/7, and these products are expected to withstand these elements for decades. Competitive brands of modified bitumen membranes repel water, however, cut edges of these membranes can allow moisture to wick into exposed fabric edges, especially along drains, flashings, and end laps.  If moisture becomes entrapped within another manufacturer's membrane, it can expand upon heating and potentially create small blisters in the top surface of the membrane. 

    • Which roofing products contain anti-wicking fabric?

      A few single ply membranes are offered with anti-wicking reinforcement, which enables them to be installed without the requirement of applying a “cut-edge” sealant to field trimmed edges.  Tremco TPA Single Ply is one such product which is reinforced with a anti-wicking fabric.  However, no one other than Tremco offers a modified bitumen membrane which contain an anti-wicking fabric. 

      The following POWERply Endure Membranes contain an anti-wicking fabric:

        • POWERply Endure 100 FR
        • POWERply Endure 100 Smooth
        • POWERply Endure 300 FR
        • POWERply Endure 300 Smooth
        • POWERply Endure 320 FR
        • POWERply Endure 320 Smooth
    • Where is the RooF-ID™ Technology located on the POWERply Endure MB?
      You can see the RooF-ID chip embedded on the underside middle of each roll at a 15’ – 20’ spacing. 
    • How can I read the information on the RooF-ID Technology?
      A hand-held UHF scanner, similar to those used to read inventory in a department store, is required to activate and read the number that Tremco has marked to the RooF-ID technology.   The number should be forwarded by the local Tremco Representative to the Tremco Roofing Product Group (using the technical help desk at productgroup@tremcoinc.com), and this number can be cross referenced to determine the vital statistics, such as Product Name, Production Date, and other performance data.  The RooF-ID is an extension of the Tremco Quality Control process and is offered at no additional price to the contractor or building owner. 

For a complete line of Tremco Roofing products and information, visit www.tremcoroofing.com